Welding

Book your service

 

Sometimes welding work is required on a car. Especially if the sills or other parts of the body have been damaged by rust. As soon as the rust damage is so severe that the stability of a component of the body is endangered, the areas must be cut out. But it is possible to weld with new metal sheets.

Professional vehicle repair or restoration includes various welding jobs.

One such job is the construction of a new, street-compatible or performance-enhancing exhaust system.

Most car workshops no longer weld on the exhaust. Due to the welding work, the exhaust can still be used for a few months, but it usually makes more sense to install a new exhaust right away.

With proper and professionally executed welds, we can guarantee that the system lasts for a long time and, above all, is leak-proof and does not misdirect the exhaust gases.

Of course, we also weld all visible and invisible parts on your car in such a way that the weld seam is as invisible as possible and can still be checked quickly and easily for stability or oxidation. Furthermore, the weld seam is also optimally and professionally treated by us to avoid rapid oxidation or rusting.

SERVICE

  • Exhaust systems
  • Chrome parts
  • Small parts
  • Underbody
  • Aluminium welding
  • and much more

Here at One Stop Tyres Welding Sheffield we do not only carry out welding work with just simple steel, but are also familiar with aluminium, copper or chrome steel and can, therefore, weld everything for you that can be welded on a car. Of course, we always make sure that the parts to be welded do not become too hot and can cool down properly in between in order to avoid unsightly deformation and to avoid possible additional costs, for example by having to purchase an expensive original part.

Since welding on supporting elements of a car, for example on the sills, is subject to strict legal requirements, it is advisable always to consult a specialist to be on the safe side and not to make any mistakes.

Welding in Sheffield - One Stop Tyres!

This is the only way to ensure that the work is carried out correctly and professionally and that your vehicle is street-legal. Otherwise, it is possible that the car will not pass the MOT test, and you will end up with double the work and immense extra costs.

In some cases, welding can be quite time-consuming work.

If, for example, welding work on the underbody is required, the complete interior equipment must be removed. Due to the heat generated during welding, this would immediately go up in flames. The same applies to doors. The entire door trim, the electronics for the central locking system and the electric window lifters must also be removed. Only then can welding begin. After welding, the weld seams are then ground smooth and the repaired areas repainted. Here at One Stop Tyres, the Welding Sheffield work is always carried out to perfection.

Before we start working on your car, we will always examine it thoroughly. Our experienced team can then provide you with an accurate estimate.

If there are smaller holes in the sleepers or cracks in the body, it is well worth welding such damage.

In order to avoid high costs for complex repairs, the car should always be well maintained. It is not only essential to treat the visible areas of the body with paint care and preservatives.

It is much more important to thoroughly clean the underbody and the lower areas of the sills. As a rule, rust first forms in these areas. Since these areas of the body are difficult to see, the rust is usually only noticed when there is already severe damage. Therefore, it is highly recommended to look at the car from below from time to time.

It is much more important to thoroughly clean the underbody and the lower areas of the sills. As a rule, rust first forms in these areas. Since these areas of the body are difficult to see, the rust is usually only noticed when there is already severe damage. Therefore, it is highly recommended to look at the car from below from time to time.

Here at One Stop Tyres Welding Sheffield, our experts can carry out these regular inspections for you when you bring the vehicle in for a service, before the next MOT test or as a separate service whenever you want us to have a look at your car.

If you have any queries about our One Stop Tyres Welding Sheffield, please call, write or just come directly to our workshop.

We are here for you.



For more information and quotes